Pfeifer Industries :: Submit Design
 
Submit Your Design
CUSTOM PULLEY WORKSHEET
cUSTOMER iNFORMATION
Company:
Contact Name:
Address:
City:
State:
  Zip:
Phone:
Fax:
Email:
Website:

PULLEY DESIGN INFORMATION:
Prototype or Production:
Prototype
Production
   
Quantity Required :
Qty:


Material Type :
12L14 Steel
6061 Aluminum
319 Cast Aluminum
Other
   
Drawing Available :
Yes
No
   
Upload Drawing :
Formal Drawing is Not Required
   
Plating / Coatings Available:
No Plating Required
   
Steel Plating Coatings
Zinc Clear Chromate (RoHS Compliant) Silver finish
Zinc Di-Chromate -Gold Finish
Black Oxide - Dull Black Finish
Nickel
Other Steel Available upon Request
 
Aluminum Plating Coatings
Anodizing -Any color you want
Black Hardcoating - Dull Black Finish
Clear Hardcoating - Dull grey finish
Other Aluminium Available Upon Request

Synchronous Pitch / Profile Required :
5mm HTD
5mm PowerGrip GT
8mm HTD
8mm PowerGrip GT2
8mm PolyChain
Others Available Upon Request

Number Of Teeth :
Number of teeth required:

~Tooth ranges were able to manufacture for pitch/profiles available
  5mm HTD (17-200 Tooth)
  5mm PowerGrip GT (16-200 Tooth)
  8mm HTD ( 14-140 Tooth)
  8mm PowerGrip GT2 (22-140 Tooth)
  8mm PolyChain (14-140 Tooth)

Width of Belt to beUsed :
Width of Belt to be Used:
Pulleys can be made to any belt width, and a belt can be supplied to match giving you total customization.
~Standard widths are listed below for the availbe pitch/profiles
  5mm HTD 9mm 15mm 25mm  
  5mm PowerGrip GT 9mm 15mm 25mm  
  8mm HTD 20mm 30mm 50mm 85mm
  8mm PowerGrip GT2 20mm 30mm 50mm 85mm
  8mm PolyChain 12mm 21mm 36mm 62mm

Overall length of pulley required :
Overall length of pulley required : Tolerance + / -

~If a hub is required then the following needs to be INDICATED
Hub Diameter : Tolerance + / -
Hub Length : Tolerance + / -

Flange or unflanged :
Flanged
Unflanged

~In a two pulley system, at least one pulley needs to be flanged ( we always flange the smaller of the two)
Number of Flanges :
One
Two
Other
 

Bore Types :
~Unless noted tolerances will be based on standard specifications
Straight Bore Tolerance + / -
Straight Bore for Bushing Tolerance + / -
Straight Bore with Counter Bore for Bearings Tolerance + / -
Tapered Bore Tolerance + / -
Splined
QD Bushing
Taper Lock
Others availble upon request

Keyway:
Yes Tolerance + / -
No
~Unless noted Tolerances will be bsed on standard specifications.

Are Set Screws Required:
Yes
No
Set Screws to be aligned with keyway:
Yes
No
Number of Set Screws Required:
Size of Set Screws :
Position (angle) of Set Screws to Each Other :

Special Considerations :
Multiple belt pulley (i.e. double pulley, triple pulley, etc)
Counter Bores
Snap Ring Grooves
Bolt Hole Pattern for Mounting or Weight Reduction
Dishing out of pulley for weight reduction
Subassemblies (i.e. mounting to a clutch)
Bearing installation

Additional Notes & Comments :
Email: info@pfeiferindustries.com Phone: 630-596-9000 Fax: 630-596-9002 Naperville, IL USA